1990-1993 Acura Integra Wilwood Brake Pads (Dynalite) - PolyMatrix C Compound

Wilwood Brake Pads - 4 Pads

Temperature range and overall friction value are the primary considerations for pad selection. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. Then, overall wear rate must be considered. For most asphalt and road race applications, compounds in the high temperature ranges over 1000°F range are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges, and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. If pad fade (friction loss) due to overheating occurs, then improved cooling, a heavier rotor, or a higher temperature range pad may all become necessary.

Performance Characteristics

• Medium-high friction, soft medium temp response, often used as a biasing pad in rear.
• Gentle rise to a flat torque curve
• Low wear rate.
• Medium-high friction, soft medium temp response, often used as a biasing pad in rear.

Application: 

• Race ONLY compound commonly used to reduce bias against A, B, or H compounds when additional hydraulic adjustments are not available.
• Use on any lightweight vehicle, including dirt applications, with high mechanical advantage brakes to prevent wheel lock-up in marginal traction conditions.

Characteristics:

• Medium to medium high friction compound with soft middle temperature response and a gradual rise to a flat torque curve as temperatures increase.
• Long wear rate for severe duty, sustained high temperature braking .
• Reduced friction alternative to B.

This pad fits caliper # 120-6806