1994-2001 Acura Integra Exedy Hyper Single Stage III Clutch Kit

Exedy Hyper Single Stage III Clutch and Flywheel Kit

The hyper Single Clutch is engineered to optimize performance for cars that are moderately modified, but do not require the clutch capacity of a multi-plate clutch. Similar to the multi-plate clutches, it has a forged aluminum cover that is anodized purple. The aluminum cover is stiffer than a stamped cover and therefore allow a higher level ratio to maintain the pedal efforts at a reasonable level. No clamp load deflection as in a pressed metal type cover.

All Hyper Clutches come with a steel flywheel and a 6-puck cerametallic facing, spring center damper disc assembly. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting and less wear and tear on the transmission synchros. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and generally higher than other single plate clutches.

As with all cerametallic clutches, the street drivability may be marginal due to chattering and harsh engagement characteristics.

An additional feature of the pressure plate is a series of turbine-like, air-flow enhancing vanes that keep the clutch cooler under extreme operating conditions to improve wear life.

Specs
-Number of Discs: Single
-Spring Damper Discs: Sprung Center Disc
-PUSH TYPE
-Disc Outer Diameter 200mm
-Spline Teeth / Major Diameter 24T / 26mm

Note: Steel Flywheel Included