Full-Race 10mm M10 Inconel Turbo Stud Hardware Kit T3 T4 Turbos FR-UNI-TSHK-M10

Recommended for use in twin scroll applications with our Inconel MLS T4 gasket. By using 1.5 (standard pitch) on the manifold side and 1.25 (fine pitch) on the turbo side, the standard pitch thread will stay put in the manifold while the fine pitch 1.25 Inconel nut will be easy to remove without dislodging/unthreading the stud from the flange.

This works perfectly with your existing turbo manifolds which typically use 3/8-16 hardware (the old industry standard). All you need to do is run a 10mm x 1.5 thread chaser through the 3/8-16 threads.

FEATURES

• 1.5 Thread Pitch Manifold / 1.25 Thread Pitch Turbo Hardware
• Stud torque spec: 38 Nm +/- 3 Nm (28 ft/lbs)
• Nut torque spec: 57 Nm +/- 3 Nm (42 ft/lbs)

APPLICATION NOTES

• 4 studs/nuts are included in each set.
• 4 matched Heico-Lock anti-vibration washers included
• M10 is for T3 and T4 turbos.
• Stud Overall Length: 40mm
• 1.5 Coarse Thread Length: 13mm
• 1.25 Fine Thread Length: 15.5mm

NEED MORE PARTS? 

If you are looking for something else, you can browse our Parts Catalog!