2002-2006 Acura RSX Toda High Power Exhaust Manifold

02-06 Acura RSX Toda High Power Exhaust Manifold


This competition exhaust manifold is developed based on data acquired from competition and continual engine dyno bench testing. It is designed to extract every bit of horsepower from a modified normally aspirated K20A engine. With increased power output through out the entire rpm range, this exhaust manifold improves both midrange and highend power.

Constructed entirely from stainless steel for long term durability, these headers are hand built at the TODA factory by the same team that builds the TODA Formula 3 and Formula 4 racing exhaust manifolds, therefore available quantities are low and you will not find one on every other car out there.

Highly recommended for engines already equipped with TODA camshafts.

An auxiliary oxygen sensor port is built into to every header to allow for fitment of lamda meters and air/fuel ratio monitors. This will allow for precise tuning of engine management systems and fuel control devices.

NOTE The TODA exhaust manifold is designed for the Japanese DC5 Type-R. To use the TODA exhaust manifold on the U.S. RSX Type-S, the front stabilizer bar must be replaced with our special front swaybar or removed altogether. This is due to differences in the North American RSX Type-S front suspension components.


 

• Primary Runners: 45mm
• Secondary Runners: 50mm
• Collector: 60mm


*For Competition Use Only.