Tein Super Racing Spec Circuit Master Type N1 - Race Use Only - W/ Front Lower Bracket - W/OUT Spring (Sold Separately)
**Sold individually. Pillowball upper mounts, and springs need to be purchased separately.**
Type N1 is our exclusive racing model application which encompasses TEIN's technological innovations and extensive racing experience. The N1 damper is a mono tube design available in either aluminum or steel construction. Features full-length adjustment for individual adjustments of spring pre-load and damper length. Separate 20 x 20 way compression and rebound adjustment for fine tuning. The stroke and valving have been specifically designed for circuit racing conditions to provide maximum grip. TEIN highly recommends the use of TEIN racing springs with type N1 dampers. *For Race Use Only
Made in Japan under strict quality control standards and developed by highly trained suspension engineers.
Additional Features
• Available in Aluminum or Steel Construction in meet various class regulations
• Mono Tube internal construction
• Designed to be extremely lightweight
• Inverted design for strut type front and rear
• Ride Height adjustable via threaded body and spring seats
• 20 × 20 way adjustable dampers, compression and rebound separately adjustable
• Anodized green color
• 1-year Manufacturers Defect Warranty
• Available for Overhaul
Contents of Damper Kit:
Adjustable Shock Absorber × 1
Lower Spring Seat × 1
Seat Lock × 2
Bump Rubber × 1
Instruction manual
Upper Mount w/ Camber Adj
Ride Height Range (F) -72.0 / -2.83 to -103.0 / -4.06
Ride Height Range (R) -67.0 / -2.64 to -90.0 / -3.54
Spring Rate (F) 1008lbs/in (18kgf/mm)
Spring Part # (F) RS180-B1150
Spring Rate (R) 1570lbs/in (28kgf/mm)
Spring Part # (R) RS280-A1100
