Hondata FlashPro FP-ACRD-US

The FlashPro allows full user tuning and datalogging for your 2013-2015 Accord.

PRODUCT FEATURES

• Programmable ECU interface.
• Connects via OBDII diagnostic port.
• USB 2.0 connection Works with Laptop or Desktop. No ECU modification necessary.
• Live Tuning 20 hours on board datalogging memory
• Check and clear diagnostic codes.
• Custom laptop gauges.
• Dual calibration storage - upload from one of two calibrations stored in the FlashPro Accord tuning features Ignition, fuel, idle speed, table editing.
• Speed density (MAP sensor) based tuning.
• Rev and launch limiters.
• Map tracing & lambda overlay.
• Expanded fuel ignition and knock tables for forced induction.
• 4 bar MAP sensor support (43 psi).
• Individual cylinder fuel & ignition trim.
• Individual cylinder knock control Starting calibrations.

PRODUCT FITMENTS

• 2013-2015 Honda Accord 4 Cylinder Models Only
• 2013 Honda Accord Coupe
• 2014 Honda Accord Coupe
• 2015 Honda Accord Coupe
• 2013 Honda Accord Sedan
• 2014 Honda Accord Sedan
• 2015 Honda Accord Sedan

FAQ

What is the difference between a reflash and the FlashPro?
The FlashPro is tunable by anyone. Most of Hondata's reflashes are available on the FlashPro as one of the many default calibrations available.

How much power will the FlashPro make on my car?
The FlashPro itself does not make power. The combination of parts and your engine makes the power. The FlashPro allows you to tune the correct cam angle fuel and ignition your car needs. The base maps are a great place to start though. 

Do I need dyno tuning?
It shouldn't be necessary for common part combinations (intake, exhaust), but you still have the option of custom tuning if you wish to get a little more. Camshafts and race headers probably will need tuning to get the most of the them - it will depend on the manufacturer.

Can I get rid of the AFM?
You can switch to a MAP based calibration (recommended for forced induction and/or cams). You need to still physically retain the AFM because it also contains the IAT sensor.

Will this work on more than one vehicle?
The FlashPro is locked to one vehicle. It can be unlocked and transferred to another vehicle by returning the ECU to stock.

Can I share the calibrations I make for my car?
Yes.

Do I need the laptop in the vehicle to reflash the ECU?
No. The FlashPro can upload either with or without a laptop.

So does that mean 1 unit Hondata FlashPro can only work with one ecu or car only? Which means I can't buy one FlashPro and use it together with a few of my buddies Civics?
One ECU and vehicle at a time. You can unlock the FlashPro by returning the ECU to stock, and then transfer to another vehicle.

If the ECU had been reflashed by another maker, can FlashPro still work?
Probably - we could tell you based off the ECU part & serial numbers plus the calibration ID. When you unlock the FlashPro it will only be reflashed back to a stock calibration.

Can it control nitrous?
No. However, you can at least control the ignition timing to make nitrous safer.

Will dealers need a software license?
No. Every FlashPro will come with the full tuning software FlashProManager.

Do I need to send my ECU to Hondata?
No. Your ECU does not need to be modified for FlashPro.