K-Tuned Budget 9th Gen Short Ram Intake

This kits will allow to build an intake system that will perfectly match your setup. They are available in both Short Ram Intake or Cold Air configurations and can easily be switched between the two.

PRODUCT INSTALLATION

Start by selecting the proper throttle body velocity coupler to match the TB you are using. The velocity coupler provides a perfect transition from the piping to throttle body unlike standard silicone couplers. Next, you'll select the primary intake pipe size (This is the first pipe that will connect to your throttle body coupler and will also have the MAF located on it) this again, is available in 3" and 3.5" sizes.

Flashpro is required and you'll have to switch over to a MAP based tune if you are using the 3.5" pipe. If you want to go with Short Ram Intake, you can use either a regular filter or our V-Stack option. If you are going with the longer Cold Air Intake, you can again use our regular filter or V-Stack and Filter. Note that the V-Stack on the Cold Air Intake will not fit with fog lights. Unfortunately, there is not enough clearance behind the bumper.

PRODUCT FEATURES

• 3" or 3.5" Pipe Size Available
• High-Quality Plastic Construction

PRODUCT BENEFITS

• Increase Power and Performance
• Great Induction Noise
• All the necessary hardware and clamps are included

PRODUCT APPLICATION

Honda: Civic Si ONLY (2012-2015)

Note:

• Flashpro or KTuner is REQUIRED
• Does NOT fit R18 Engines

PART NUMBERS