Hawk Performance HPS Front Brake Pads compound provides advanced braking characteristics to enhance your driving experience. This unique compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports.
All Hawk Performance HPS Front Brake Pads compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors.
PRODUCT FEATURES
Smooth braking feel
Excellent for spirited driving
Gentle on rotors and extended pad life
Consistent brake release characteristics
Increased stopping power
Manufacturer
Hawk
Brake Pads Type
Street
Frict Mat. Thick Inn. Pad
15,80
Inner Pad Height (mm)
53
Inner Pad Width (mm)
135
PRODUCT FITMENT
2011 Honda Civic Si 2.0L OE Incl.Shims
2010 Honda Civic Si 2.0L OE Incl.Shims
2009 Honda S2000 CR 2.2L OE Incl.Shims
2009 Honda S2000 Base 2.2L OE Incl.Shims
2009 Honda Civic Si
2008 Honda S2000 CR 2.2L OE Incl.Shims
2008 Honda S2000 Base 2.2L OE Incl.Shims
2008 Honda Civic Si 2.0L OE Incl.Shims
2008 Honda Civic MUGEN Si 2.0L OE Incl.Shims
2007 Honda S2000 Base 2.2L OE Incl.Shims
2007 Honda Civic Si
2006 Honda S2000 Base 2.2L OE Incl.Shims
2006 Honda Civic Si 2.0L OE Incl.Shims
2006 Acura RSX Type-S 2.0L OE Incl.Shims
2005 Honda S2000 Base 2.2L OE Incl.Shims
2005 Acura RSX Type-S 2.0L OE Incl.Shims
2004 Honda S2000 Base 2.2L OE Incl.Shims
2004 Acura RSX Type-S 2.0L OE Incl.Shims
2003 Honda S2000 Base 2.0L OE Incl.Shims
2003 Acura RSX Type-S 2.0L OE Incl.Shims
2002 Honda S2000 Base 2.0L OE Incl.Shims
2002 Acura RSX Type-S 2.0L OE Incl.Shims
2001 Honda S2000 Base 2.0L OE Incl.Shims
2000 Honda S2000 Base 2.0L OE Incl.Shims
PRODUCT INSTALLATION
Standard installation procedures are outlined and should be followed in accordance with the application-specific brake pad installation instructions provided by the vehicle manufacturer.
Install brake pads properly. Be sure pads are securely positioned in the caliper.
Check Brake Fluid. Flush and replace, as needed.
Check all hydraulic parts for excess wear and tear.
Check rotor for deep grooves or scoring. Resurface or replace rotor, as needed.
If rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130-grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.
Inspect calipers for freedom of movement. Lubricate where necessary.
This product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
NEED MORE PARTS?
Check out other parts for HAWK Performance brand here! If you are looking for something else, you can browse our Parts Catalog!
Welcome to our new site. We are still working on moving our customer information. To place an order please create a new account or checkout as a guest. Thank you for your patience.
Total Reviews (0)
Write the First Review!