Hawk Performance HPS Front Brake Pads HB361F.622

Hawk Performance HPS Front Brake Pads compound provides advanced braking characteristics to enhance your driving experience. This unique compound combines the safety and quality of Aerospace design partnered with the braking technology of motorsports.

All Hawk Performance HPS Front Brake Pads compounds are not compatible with carbon ceramic rotors. Hawk pads are designed to work with Iron/Metal rotors.

PRODUCT FEATURES

• Smooth braking feel
• Excellent for spirited driving
• Gentle on rotors and extended pad life
• Consistent brake release characteristics
• Increased stopping power

PRODUCT FITMENT

• 2011 Honda Civic Si 2.0L OE Incl.Shims
• 2010 Honda Civic Si 2.0L OE Incl.Shims
• 2009 Honda S2000 CR 2.2L OE Incl.Shims
• 2009 Honda S2000 Base 2.2L OE Incl.Shims
• 2009 Honda Civic Si
• 2008 Honda S2000 CR 2.2L OE Incl.Shims
• 2008 Honda S2000 Base 2.2L OE Incl.Shims
• 2008 Honda Civic Si 2.0L OE Incl.Shims
• 2008 Honda Civic MUGEN Si 2.0L OE Incl.Shims
• 2007 Honda S2000 Base 2.2L OE Incl.Shims
• 2007 Honda Civic Si
• 2006 Honda S2000 Base 2.2L OE Incl.Shims
• 2006 Honda Civic Si 2.0L OE Incl.Shims
• 2006 Acura RSX Type-S 2.0L OE Incl.Shims
• 2005 Honda S2000 Base 2.2L OE Incl.Shims
• 2005 Acura RSX Type-S 2.0L OE Incl.Shims
• 2004 Honda S2000 Base 2.2L OE Incl.Shims
• 2004 Acura RSX Type-S 2.0L OE Incl.Shims
• 2003 Honda S2000 Base 2.0L OE Incl.Shims
• 2003 Acura RSX Type-S 2.0L OE Incl.Shims
• 2002 Honda S2000 Base 2.0L OE Incl.Shims
• 2002 Acura RSX Type-S 2.0L OE Incl.Shims
• 2001 Honda S2000 Base 2.0L OE Incl.Shims
• 2000 Honda S2000 Base 2.0L OE Incl.Shims

PRODUCT INSTALLATION

Standard installation procedures are outlined and should be followed in accordance with the application-specific brake pad installation instructions provided by the vehicle manufacturer.

• Install brake pads properly. Be sure pads are securely positioned in the caliper.
• Check Brake Fluid. Flush and replace, as needed.
• Check all hydraulic parts for excess wear and tear.
• Check rotor for deep grooves or scoring. Resurface or replace rotor, as needed.
• If rotors do not need resurfacing, then contamination from the previous brake pads must be removed. Sand rotors with 130-grit sandpaper using moderate pressure. Use soap and water to clean rotor surface after sanding. Rotors should be free and clear of oil, grease and brake fluid.
• Inspect calipers for freedom of movement. Lubricate where necessary.

Download instructions

Warning:

This product can expose you to Silica, crystalline (airborne particles of respirable size), which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

NEED MORE PARTS?